Trade Specification of Various Imported Edible Oils PDF
FOSFA Contract 80/81 to govern
Quality Specification | |
---|---|
FFA | 4.5% max |
Moisture and impurities | 0.50% |
Contract 80/81 to govern
PORAM Specification | |
---|---|
FFA (As Palmitic) | 0.1%max |
Moisture and impurities | 0.1%max |
I.V. (Wijs) | 56min |
M.Pt. Degrees C (AOCS Cc3-25) | 24max |
Colour (5 ¼” Lovibond cell) | 3Red max |
FOSFA Contract 80/81 to govern
Specification | |
---|---|
FFA (As Palmitic) | 0.1%max |
Moisture and impurities | 0.1%max |
I.V. (Wijs) | 58min |
M.Pt. degrees C (AOCS Cc3-25) | 24max |
Colour (5 ¼” Lovibond cell) | 3Red max |
FOSFA Contract 54 to govern
Quality Allowance and Specification | |
---|---|
FFA | Basis 2% Max 3% (Below 2% acceptable) Allowance for above 2% upto 3% Non-reciprocal 1:1 |
Moisture and impurities | 0.50% max |
FOSFA Contract 54 to govern
Quality and allowance as per ANEC81/FOSFA54 | |
---|---|
FFA (expressed as oleic; molecular weight 282) | Basis 1%max |
Moisture and volatile matter | 0.20%max |
Impurities (insoluble in petrol ether) | 0.10%min |
Lecithin (expressed as phosphorus) | Basis 0.02%4max |
Unsaponifiable matter (test as per N.S. P.A.) | 1.50% max |
Colour in a 1 inch Lovibond cell | Not darket than 50 Yellow & 5 Red |
Oil with a flashpoint below 250 F (121 C) is rejectable |
Only the following deviations are allowable with the discounts to apply as shown:
Quality Allowance and Specification | |
---|---|
FFA | 1.75% max |
Moisture, Volatile Matter & impurities | 0.4% |
Lecithin (Expressed as Phosphorus) | 300 MG/KG max |
Erucic Acid | 2% max |
Flashpoint | 250 F (121 C) min |